WindSonic Sensor Mounting Mast
with FREE UK Standard Delivery
For easy mounting of your WindSonic or WindSonic M sensor, use our anodised aluminium alloy mounting mast.
The mounting mast is 895mm high and is drilled and tapped at one end to suit the fastenings on a WindSonic sensor.
The base end has one hole suitable for attaching an earth strap or for securing the WindSonic cable with a cable tie.
24 HOUR SHIPPING
Processing Mon-Frion all in-stock models |
FREE UK DELIVERY
Free standard deliveryNext day delivery available |
RETURN POLICY
Not 100% satisfied?Return within 21 days |
This mast is ideal for clamping to a pole or other structure to raise the anemometer clear of obstructions that would interfere with the wind flow. Met office wind measurements are generally taken at 10m above ground level.
The mast is also suitable for mounting a MetPak weather station. The sensor is clamped via a single u-bolt to the mast.
WindSonic Mounting Mast Features
• Height: 895 mm
• Diameter: 44.45 mm OD
• Drilled and tapped (M5) to suit WindSonic sensor mounting
• Anodised aluminium alloy
• Compatible with both standard WindSonic and WindSonic-M sensors
| Physical | Dimensions | Diameter: 44.45 mm OD Length: 895 mm |
| Weight | 1.0 kg approx | |
| Material | Anodised aluminium alloy |
The manufacturer reserves the right to amend the specification and therefore the information in this document may be subject to change.
Richard Paul Russell Ltd
The Lodge
Unit 1 Barnes Farm Business Park
Barnes Lane, Milford on Sea
SO41 0AP
Tel: +44 (0) 1590 641223
Customer Service
Technical Support
About RPR
Company registration number 2746689. VAT no. GB580260358
